Alpine KTX-100EQ Owners Manual - Page 5
Activate IMPRINT SOUND MANAGER installed - used
UPC - 793276401519
View all Alpine KTX-100EQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 Activate IMPRINT SOUND MANAGER installed on the PC. • Strictly observe the Warnings and Cautions written by the manufacturers ofyour PC and peripheral equipment. We do 1I0t accept responsibility for data lost due to the incorrect operatioll of the IMPRINT SOUND MANAGER. We recommend you to back-up your important dma regularly. 4 Set the Measurement Microphone in the vehicle, and start measurement according to the indications on the IMPRINT SOUND MANAGER screen. Perform PC operation outside the vehicle. • If error occurs during measurement. resolve the problem by referring to tlte "Message List" table described in tlte last pages. Then. close the dialog box by double-clicking tlte OK bUIIOII, and exit the program. Afier disconnecting tlte Itead unit cable and bringing the front panel back to tlte original position. and start the MultEQ selling operation. 5 Choose by double-clicking one of the Area Selection items to be measured from the IMPRINT SOUND MANAGER screen. 6 Place the measurement microphone in the location according to the indication of the IMPRINT SOUND MANAGER screen. Place the microphone in a vertical position, at ear level (a camera tripod is useful for this purpose). 4-EN