Alpine N872A Installation Guide - Page 11

3-2. NVE-N872A Wiring Diagram With CVA-1014/CVA-1004/CVA-1003 (10A) Battery Lead (Yellow) ACC (Ignition) (Red) Ground (Black) Dimmer In (Illumination) (+) (White/Blue) Parking Brake (Yellow/Blue) XM Data Receiver HCE-100XM (Sold Separately) Reverse (+) (Orange/White) Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V - 3V) Mute (Pink/Skyblue) BATTERY To the Acc power lead Connect to a metal part of chassis body with screw To the Illumination signal line To the parking brake signal line To reverse lights (+12V signal) To the vehicle speed pulse line Use this to connect a device having the IN-INT function (-) output for Audio Mute 13P RGB Extension Cable Included Microphone for voice recognition/ Speak button for voice recognition (Included) GPS Antenna (Included) A GPS ANTENNA 5 1 10 6 POWER MIC/SW DISPLAY EX-3 EX-2 EX-1 12 3 4 5 6 7 8 9 10 A Power Connector Pin Configuration 1 Ground (Black) 2 ACC (Ignition) (Red) 3 Mute (Pink/Skyblue) 4 Open 5 Open 6 Battery (Yellow) 7 Dimmer In (Illumination) (White/Blue) 8 Speed Sensor (Green/White) 9 Parking Brake (Yellow/Blue) 10 Reverse (Orange/White) Improper connection of the speed pulse line may cause important safety features of the vehicle to fail (such as the brakes or air bags). Such failures may result in an accident and loss of life. We strongly recommend that the installation be performed by a trained, authorized Alpine dealer. Use for future system expansion 10