Alpine N872A Installation Guide - Page 14
Confirmation - parts manual
UPC - 793276100139
View all Alpine N872A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
a When mounting with floor base brackets 1 Mount the brackets 1. Mount the brackets 1 at both sides of the unit with screws with double washer (M4×8) 3. 3 1 Depending on the locations of the mounting screw holes, the mounting brackets (for the left and right) can be used on either side. 1 3 2 Determine mounting position of the floor bases 2 for placement under the carpet. 3 Cut the carpet in "x" shape with a cutter and insert the floor bases 2 from under side of the carpet. 2 4 Mount the unit on the carpet with spring washers (M6) 6 and wing nuts (M6) 8. Continued to step 5 "Securing leads, etc." 8 6 8 5 Securing leads, etc. 6 Make sure leads are not pinched by moving parts such as the seat rail, etc. Also check for dam- aged from sharp edges or protrusion. 6 Connect the battery (−) terminal. 2 5. Confirmation 1 Turn on the engine key. Make sure the unit is operating correctly by referring to the Owner's Manual. ON 2 Make sure all factory components such as the brake lamps, etc. work correctly. a Remote control holder mounting method • If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box. • When the holder cannot be mounted securely with double-sided adhesive tape !, mount it by using screws ". Remote control holder Reinforcement screws " Remote control Protective Paper !* Console box, etc. * Double-sided adhesive tape. (Before attaching the tape, make sure the mounting location is free from dust or dirt.) 13