Alpine S690 Owners Manual - Page 42
Connections - dha remote control
UPC - 093276200625
View all Alpine S690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Connections Fuse (5A) Yellow BATTERY Cable Color Cable Specifications Yellow • Battery Lead Connect this lead to the positive (+) post of the vehicle's battery. Red IGNITION • Switched Power Lead (Ignition) Red Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position. When connecting with the Ai-NET compatible AV head unit or the Ai-NET compatible head unit, do not connect the ignition lead. Ignition Key White/Brown REMOTE IN White/ • Remote Control Input Lead Brown This lead is used in combination with the Ai-NET compatible AV head unit or the ALPINE monitor with a remote control output lead. To remote control output lead Black GND • Ground Lead Black Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Connect to a metal part of chassis body with a screw • Remote Control Eye Jack Connect this to the remote control sensor unit. Not used when using a monitor with a built-in remote control sensor unit. A remote control sensor unit is needed when a monitor or navigation unit made by other company is connected. Remote Control Eye • Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET. Yellow • Digital Output Terminal (Optical) This terminal is used to connect DHA-S690 to ALPINE digital audio processor (PXA-H700,etc.). An optional fiber optic cable that will plug directly into the Digital Output Terminal of the DHA-S690. • Video Output Connector This connector is used in combination with the video inputs of another video product (AV head unit or TV monitor). White (L) Red (R) • Audio Output Connectors This output may be connected to a Rear Monitor with a volume control or an auxiliary audio preamp. This is used to monitor the DVD audio while the main audio system is being driven by another source (such as Radio or CD). • S video Output Terminal Outputs S video signal. Connect to the input terminal of S video of connected devices. • Connect properly. Never connect to parts other than the ones indicated in these operating instructions. • Also refer to the operating instructions of the other products in the system. 40-EN