Alpine S690 Owners Manual - Page 45
Connecting an Ai-NET compatible AV head unit / Digital Audio Processor - cd changer dha
UPC - 093276200625
View all Alpine S690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• Connecting an Ai-NET compatible AV head unit / Digital Audio Processor Change the system switch on the AV head unit to "EQ/DIV." AV Head Unit IVA-D106, etc. (Sold Separately) Ai-NET Connector AUX Video Input Terminal Ai-NET Cable Remote Control Output Lead Fiber Optic Cable (White/Brown) (Sold Separately) Ai-NET Input Connector Digital Audio Processor PXA-H701, etc. (Sold Separately) Digital Input Terminal (Optical) (Changer) Ai-NET Input Connector (CHANGER IN) RCA Extension Cable (included) Remote Control Input Lead (White/Brown) Digital Output Terminal (Optical) Ai-NET Connector Ai-NET Cable (included) Video Output Connector DHA-S690 Setting of DHA-S690 The DHA-S690's system settings must be made after connections are completed. Before fixing the unit in place, refer to page 41 to change the system setting. System Switch 12 Switches to "1". • Be sure to switch the head unit's system switch before turning the power on. • Be sure to make the setting (DVD CHG or CD CHG) in "Setting the Connected Head Unit" (page 21) according to the connected Ai-NET compatible head unit. • If CD CHG is set in "Setting the Connected Head Unit" (page 21): If you want to play back a DVD Audio, set "Switching the input (non Ai-NET connections)" on the connected Alpine audio processor (PXA-H700, PXA-H701) to "Analog." For details on operation, refer to the Owner's Manual of the audio processor. • The switched Power Lead (Ignition) connection is not needed. • Also refer to the operating instructions of the other products in the system. • When connecting the optical digital output to a digital audio processor, be sure to make connection to the CHANGER connectors of the digital audio processor optical digital input connectors. This arrangement allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects even when connection is made to the CHANGER connectors. Observe the following when using Fiber Optic Cable. • Be careful not to bend the fiber optic cable at a sharp angle. • Do not coil the fiber optic cable smaller than a 30 mm radius. • Do not place anything on top of the fiber optic cable. 43-EN