Alpine iLX-F309TND Installation Manual - Page 5
Factory Unit Disassembly Process
View all Alpine iLX-F309TND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Factory Unit Disassembly Process 1 Use a panel removal tool to release clips of the cigarette lighter/AUX panel and remove it. iLX-F309TND Toyota Tundra 5/19 2 Use a panel removal tool to release the clips on the HVAC control panel and remove it. 3 Use a 10mm socket to extract (4) 10mm screws below the radio. 4 Use a panel removal tool to release the clips on the upper section of the radio disconnect and remove it. 5 Use a panel removal tool to release screw cover on the driver's side A pillar. 6 Extract a 10mm screw and remove the A pillar cover.
Toyota Tundra
iLX-F309TND
±
5/19
Factory Unit Disassembly Process
1
Use a panel removal tool to release clips of the
cigarette lighter/AUX panel and remove it.
3
Use a 10mm socket to extract (4) 10mm screws
below the radio.
5
Use a panel removal tool to release screw cover on
the driver’s side A pillar.
2
Use a panel removal tool to release the clips on the
HVAC control panel and remove it.
4
Use a panel removal tool to release the clips on the
upper section of the radio disconnect and remove
it.
6
Extract a 10mm screw and remove the A pillar
cover.