Ariens Compact 22 Owners Manual - Page 33

Troubleshooting, Probable Cause

Page 33 highlights

PROBLEM Does not operate in Forward / Reverse. Small rubber beads collect in frame Unit throws snow poorly or does not throw snow. TROUBLESHOOTING PROBABLE CAUSE CORRECTION 1. Friction disc not adjusted properly. 2. Traction belt not functioning. 3. Speed selector not adjusted properly. 1. Repair or replace friction disc (see Friction Disc Replacement on page 30). 2. Repair or replace traction drive belt (see Traction Drive Belt Replacement on page 26). 3. Adjust speed selector (see Speed Selector Adjustment on page 24). 1. Friction disc wear. 1. Normal friction disc wear. Chunks or large pieces of rubber mean friction disc should be checked and replaced as necessary. 1. Shear bolts broken. 2. Attachment clutch/brake not adjusted properly. 3. Auger is frozen in place. 4. Ice or debris is obstructing auger. 5. Attachment drive belt slipping, worn or damaged. 1. Replace shear bolts (see Shear Bolts on page 23). 2. Adjust attachment clutch/brake (see Attachment Clutch/Brake Adjustment on page 27). 3. Move unit to a warm place to thaw. 4. With the engine off and auger disengaged, check for obstructions and remove. 5. Adjust or replace attachment drive belt (see Attachment Clutch/Brake Adjustment on page 27). GB - 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

GB - 33
Does not
operate in
Forward /
Reverse.
1. Friction disc not adjusted
properly.
2. Traction belt not
functioning.
3. Speed selector not
adjusted properly.
1. Repair or replace friction disc
(see Friction Disc Replacement
on page 30).
2. Repair or replace traction drive
belt
(see Traction Drive Belt
Replacement
on page 26).
3. Adjust speed selector
(see
Speed Selector Adjustment
on
page 24).
Small rubber
beads collect
in frame
1. Friction disc wear.
1. Normal friction disc wear.
Chunks or large pieces of
rubber mean friction disc
should be checked and
replaced as necessary.
Unit throws
snow poorly
or does not
throw snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Auger is frozen in place.
4. Ice or debris is
obstructing auger.
5. Attachment drive belt
slipping, worn or
damaged.
1. Replace shear bolts
(see Shear
Bolts
on page 23).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment
on page 27).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belt
(see Attachment
Clutch/Brake Adjustment
on
page 27).
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION