Ariens Max Zoom 48 Operation Manual - Page 6
Emission Control System, Safety Rules, Warning, Hot Surfaces, Rotating Parts, Danger, Caution
View all Ariens Max Zoom 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Shut off engine, remove key, read manual before you adjust or repair unit. OL4010 NO STEP! Always keep feet away from rotating parts. OL4420 3. WARNING! Do not operate mower unless guards are in operating position or bagger is attached. Always stand clear of discharge area. OL4430 Do not operate mower unless bagger is attached or guards are in operating position. OL3320 4. HOT SURFACES! DO NOT touch parts which are hot from operation. ALWAYS allow parts to cool. OS0731 5. ROTATING PARTS AVOID INJURY. Stay clear of rotating parts. OF3450 6. DANGER! AVOID INJURY. Stay clear of rotating parts. OL4730 7.DANGER! Keep hands and feet away. 8.CAUTION ! No Smoking MAX. FILL Fill fuel tank to bottom of neck MAXIMUM. WARNING: Over Filling may cause severe damage to evaporative system! • Never fill fuel tank when engine is running, hot or unit is indoors. Never overfill fuel tank. • Replace fuel cap securely and clean up spilled fuel. EMISSION CONTROL SYSTEM This equipment and/or its engine may include exhaust and evaporative emissions control system components required to meet U.S. Environmental Protection Agency (EPA) and/or California Air Resources Board (CARB) regulations. Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by an Ariens Company dealer or an authorized engine manufacturer's service center. Contact your Ariens Company Equipment Retailer concerning emission controls and component questions. SAFETY RULES Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/or damage to unit. ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury. Complete a walk around inspection of unit and work area to understand: • Work area • Your unit • All safety decals Determine which attachments are needed and can be used safely. GB - 6