Ariens Max Zoom 48 Operation Manual - Page 9
Avoid Electric Shock. Objects contacting both, condition. Damaged or worn out muffler can
View all Ariens Max Zoom 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lockopen device. If fuel is spilled on clothing, change clothing immediately. Avoid Electric Shock. Objects contacting both battery terminals at the same time may result in injury and unit damage. DO NOT reverse battery connections. Reverse connections may result in sparks which can cause serious injury. Always connect positive (+) lead of charger to positive (+) terminal, and negative (-) lead to negative (-) terminal. ALWAYS disconnect negative (-) cable FIRST and positive (+) cable SECOND. ALWAYS connect positive (+) cable FIRST, and negative (-) cable SECOND. Explosive Gases from battery can cause death or serious injury. Poisonous battery fluid contains sulfuric acid and its contact with skin, eyes or clothing can cause severe chemical burns. No flames, No sparks, No smoking near battery. ALWAYS wear safety glasses and protective gear near battery. Use insulated tools. DO NOT TIP battery beyond a 45° angle in any direction. ALWAYS keep batteries out of reach of children. Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. ALWAYS block wheels and know all jack stands are strong and secure and will hold weight of unit during maintenance. Release pressure slowly from components with stored energy. NEVER attempt to make any adjustments to unit while engine is running (except where specifically recommended). Stop engine, remove key or spark plug wire and wait for all moving parts to stop before servicing or cleaning. Check parking brake operation frequently. Adjust and service as required. ALWAYS maintain unit in safe operating condition. Damaged or worn out muffler can cause fire or explosion. Maintain or replace safety and instruction labels, as necessary. NEVER store unit with fuel in fuel tank, inside a building where any ignition sources are present. Shut off fuel and allow engine to cool completely before storing in closed area or covering unit. Clean grass and debris from unit, especially from around muffler and engine, to help prevent fires. For extended storage, shut off fuel and clean unit thoroughly. See engine manual for proper storage. Lower cutting deck unless a positive mechanical lock is used. Use only attachments or accessories designed for your unit. Check all hardware at regular intervals, especially blade attachment bolts. Keep all hardware properly tightened. Check attachment components frequently. If worn or damaged, replace with manufacturer's recommended parts. GB - 9