Ariens Power Brush 28 Owners Manual - Page 16

2 1 -A- 3 4 1. Brush Assembly 2. Cable Attaching Hardware 3. Assembly Bolt Holes 4. Bottom Cover OS7242 Figure 10 MAINTENANCE SCHEDULE The chart below shows the recommended maintenance schedule that should be performed on a regular basis. More frequent service may be required due to working conditions (heavy loads, high ambient temperatures, dusty conditions, or airborne debris). MAINTENANCE SCHEDULE Service Performed Each Every Every Yearly Use 5 hrs. 25 hrs. Check • Fasteners Check Clutch • Operation Check Clutch Spring Adjustments *• Clean Engine • Clean Recoil • Guard Foam Cover Check Engine • Oil Change Engine Oil ** • Check Tire • Pressure General Lubrication *** • • * After first five hours of operation. ** After first two hours of operation. *** Oil chains and u-joint friction areas after first 5 hours of operation and every 25 hours thereafter. CHECK FASTENERS Make sure all hardware is tightened properly. CHECK CLUTCH OPERATION Brush must stop quickly when attachment clutch lever is released. Wheels must stop quickly when traction drive clutch lever is released. If clutches do not engage or disengage properly, adjust or repair before operation (see Service and Adjustments). GB - 16