Ariens Power Brush 36 Owners Manual - Page 18

GENERAL LUBRICATION, Apply Hi-Temp Grease Part Number

Get Ariens Power Brush 36 PDF manuals and user guides View all Ariens Power Brush 36 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

GENERAL LUBRICATION See Figure 8. 1. Place unit into the service position (See Service Position on page 15). IMPORTANT: Wipe each fitting clean before and after lubrication. DO NOT allow grease or oil to get on friction disc, friction plate or belts. 2. Apply Hi-Temp Grease (Part Number 00036800) or equivalent to the lubrication fittings after the first 16 hours of use and every 8 hours thereafter. See Service Parts on page 28. 3. Apply a few drops of oil to the friction disc drive chain at the beginning of the season or every 25 operating hours. NOTE: Brush attachment gear case is lubricated at the factory and should not require additional lubrication. 4. Place unit into the operating position (See Operating Position on page 16). Grease Oil Figure 8 OS0743 GB - 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
GB - 18
GENERAL LUBRICATION
See Figure 8.
1. Place unit into the service position (See
Service Position
on page 15).
IMPORTANT:
Wipe each fitting clean before
and after lubrication. DO NOT allow grease or
oil to get on friction disc, friction plate or belts.
2. Apply Hi-Temp Grease (Part Number
00036800) or equivalent to the
lubrication fittings after the first 16 hours
of use and every 8 hours thereafter
.
See
Service Parts
on page 28.
3. Apply a few drops of oil to the friction
disc drive chain at the beginning of the
season or every 25 operating hours.
NOTE:
Brush attachment gear case is
lubricated at the factory and should not
require additional lubrication.
4. Place unit into the operating position
(See
Operating Position
on page 16).
Figure 8
OS0743
Grease
Oil