Asko D5436XLS Use and Care Guide EN - Page 10

Settings Do as follows to open the settings menu: Button press Description 1. Turn off the dishwasher using the main power switch. Wait about five seconds. Then press the main power switch again. Wait until the numbers appear in the right-hand display before continuing to the next step. 2. Within five seconds, press and hold the Program selector (wait for the audible signal confirming the + button press) and then immediately press the Long dry button without releasing the Program selector. Keep the buttons pressed until the symbols for the Heavy wash and Rinse & Hold programs start to flash. PROG TIP! Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to open the settings menu the first time. PROG S TA R T STOP Press to save the setting value and continue to the next setting. Current setting. Display Current setting value. Press to browse between setting values. You can now adjust the following settings: Button press Options Settings (Off) (On) Child lock (Kid Safe™) Description You can activate the child lock (button lock) option to prevent children from starting the dishwasher. Press the High temperature and Long dry buttons simultaneously to temporarily deactivate the button lock when you want to start the dishwasher. The button lock is automatically reactivated after 2 minutes. Press Start/Stop to save the setting value and continue to the next setting. If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu. 10