Asko DC7171 User manual Use & Care Guide ASKO DC7171 EN - Page 10

Connection to a vent duct When the cabinet is on, 45 m³ (1590 cubic ft) of moist air is discharged per hour. Because of this, make sure that air can enter the room to replace the moist air that has been removed. The drying cabinet can be connected to a vent duct in two ways: By means of a draft stabilizer The vent duct valve is replaced with the supplied draft stabilizer. See also the section "Ventilation connection", on page 18. The length of the hose for ventilation in supplied kit (only certain markets) is 3 1/4 ft (1 m) The drying cabinet may not be connected to a furnace duct. Do not assemble the valve which may already exist in the building in the ventilation system, inside the drying cabinet. 4 1 2 3 1. Moist air 2. Hose (maximum 3 ¼" ft (1 m) in length 3. Exhaust collar 4. Draft stabilizer 5. Air intake 5 The drying cabinet connected to vent duct with a draft stabilizer. 10 Customer Care Center 1-800-898-1879 www.askousa.com