Asko DFI564 Instructions for use - Page 21
Status light, If you want to load more dishes, Power failure, Once the program has finished
View all Asko DFI564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using the dishwasher Status light The status light at the bottom on the dishwasher provides information by means of 3 different colors. Status light Blue - Load more The program has started, but you can still load more dishes. Red - Do not load You should not load more dishes (can result in poor dishwashing). A flashing light indicates that the door has been opened while a program is in progress. If it flashes when the door is closed, an error has occurred. See the chapter Troubleshooting. Green - Unload The dishwashing program is finished. The status light stays on for 30 minutes. If you want to load more dishes4) Open the door. The dishwasher stops automatically. Add the dishes. Press within four seconds. and close the door WARNING! If the door is open, "Program paused" is shown on the display. If you want the dishwashing program to continue, press and close the door immediately. If you want to cancel the dishwashing program, press and hold for three seconds. Power failure If the dishwasher is turned off due to a power failure when a dishwashing program is running, the program continues when power is restored. If the power is lost during drying, the program is interrupted. If you open the door for more than 2 minutes during drying, the program will be interrupted. Once the program has finished The end of the program is indicated by one short signal from the buzzer. The chapter Settings describes how to change this function. Moreover, the end of the program is indicated by the status light turning green. 4) You should not load more dishes if the status light is red. 21