Asko DFI564 Instructions for use - Page 38

Installation instructions Setup • The recess and connection dimensions are included in the separate installation instructions. Check that all dimensions are correct before starting the installation. Note that the height of the integrated door panel can be adjusted to match other fittings. • The electrical and water supplies should enter through the area indicated by the shading on the illustration. Inches (mm) * 24'' (609 mm) with the trim kit. • Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet so that the dishwasher is level. Tighten the lock nuts. • If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from the dishwasher. • Mount the protective film beneath the countertop and up around the edge. The function of the protective film is to protect the countertop from moisture. (The protective film is in the enclosed plastic bag.) • Check that the machine is installed such that the door opens freely, otherwise door lock functionality may be disrupted. • Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left and right door springs equally until the door is evenly balanced. NOTE! Framed cabinets require additional finished filler material behind the face frame for a proper installation. A minimum 3½" (89 mm) finished return is required on all sides of the opening. Filler Frameless cabinetry Framed cabinetry Drain connection This dishwasher is suitable for installing in a raised recess (to obtain an ergonomic working height). This means that the dishwasher can be placed so that the drain hose runs to a lower level than the bottom of the dishwasher, such as by routing it directly to a floor drain. 38