Asko T761 User manual Use & Care Guide Asko T701,721,761,781 - Page 16

The Temperature Menu This menu lets you select a Normal or Low temperature. Only the temperatures available for the dry program you selected will display. 1. Press MENU until "Select temperature" displays. 2. Use the Arrow buttons to toggle between the Normal and Low temperature settings. 3. When the setting you prefer displays, press ENTER. The LCD will display the new temperature setting. 4. Press ENTER again to permanently save your program setting. The Delayed Start Program This program lets you delay starting the dryer for up to 24 hours. This feature is useful in areas where utility companies offer discount rates during off-peak hours. When you select Delayed Start on the program menu, you must select a delay time (1 to 24 hours). 1. Press MENU until "Select time for delayed start" displays. 2. In the bottom right corner of the LCD window, a clockface and a zero will flash. To change the zero, simply press an Arrow button until the LCD displays the number of hours you want to delay starting the program (1-24 hours). 3. Press ENTER to program your change. 4. Press ENTER again to permanently save your program setting. When you press START, the clockface and the hours you set for the delay will display, as illustrated below: The Options This lets you select Buzzer, Anti-crease, and Normal or Quick Cooling. Only the options available with the program you selected will display. (See tables on page 14.) 1. Press MENU until "Select Options" displays. 2. Continue to press MENU to scroll through the options. Page 16 3. Press an Arrow button to toggle between Off and On 4. When the setting you prefer displays, press ENTER. The LCD will display the new setting. 5. Press ENTER again to permanently save your program setting. RESTORING A PRESET PROGRAM To restore a preset program to its original settings, simply press the button (P1-P4) for the preset program you want to restore and hold it down while your press ENTER . The program will revert to its original settings. CHANGING THE LANGUAGE ON THE LCD DISPLAY There are eleven languages available for the LCD window: ♦ English ♦ French ♦ Spanish ♦ Portuguese ♦ Italian ♦ German ♦ Swedish ♦ Danish ♦ Norwegian ♦ Netherlands ♦ Finnish To change the language, follow the steps below: 1. Turn the machine off then on again. 2. Press ENTER five times in succession then press P1 five times. (This must be done within 15 seconds.) 3. When the Language menu displays, press an Arrow button to advance through the menu to the desired language. 4. Once the correct language displays, press ENTER to program the LCD window to display the language you selected. CHILD-SAFE START As a safety measure, you can program the T761 and T781 not to start unless the Start button is held down for three seconds. To do this, follow the steps below: 1. Turn the machine off then on. 2. Press ENTER five times, then press P3 five times. (This must be done within 15 seconds.) 3. "Delayed start" displays with "0" flashing in the lower right corner. Press the right Arrow button to toggle the display to "3." CHILD-SAFE MENU BUTTON Please note that when you set the child-safe Start button, the Menu button is automatically programmed to delay for three seconds before it becomes active. This prevents a child from accidentally changing the program settings. When you want to change a program, press the Menu button for three seconds to activate the menus. The Menu button will work normally (without the 3-second delay) until you have completed your changes. If it is not pressed for two minutes, it will automatically revert back to the child-safe mode.