Asko TL751XXL User manual 20 200 20 Asko TL751 XXL EN - Page 18

Damp Signal, Anti-crease, Delay Start, Child Lock, Estimated Time Remaining

Page 18 highlights

Selecting options Note! Time change is available only with Manual dry, Dry Time and Rack dry programs. Damp Signal When you select the Damp Signal option, a beep will alert you when your load is just damp enough for ironing or pressing. This notice will allow you to remove lightweight items that are dried or other items that you may wish to iron. Anti-crease This option helps to prevent wrinkles on your laundry. When you select the Anticrease option, the drum will periodically rotate until you press the Power button, Start/Stop button, or open the door. You can use this option in case you cannot remove laundry immediately after drying is done. Delay Start When you select Delay Start, the machine will start between 1 and 12 hours after you press the Start/Stop button. • Press the Delay Start button the same number of times as the number of hours by which you want to delay the start (1~12 hours). • The number of hours of delay start you have selected will be shown in the display. • Press the Start/Stop button. • The number of hours to start is displayed with a countdown one hour at a time. • Cancel Delay Start by pressing power button and turning the machine off. • Turn the power back on, select a program and press the Start/Stop button. Note! Remember to press the Start/Stop button to start the program. Child Lock * The child lock option can be used to prevent a child from pausing or cancelling a dry program once it has been started. To set this option, you must first select a dry program and any desired options. Press the Start/Stop button to start the cycle. Next, press the Child lock button for 3 seconds to engage the Child lock option. Child lock will be lit up as long as the option is active. To cancel this mode, hold the Child lock button again for 3 seconds, and turn off the main power button. You will have to set the Child Lock option at the beginning of every cycle you choose to have protected. Estimated Time Remaining The display shows the estimated time remaining. In addition to this, if the dryer has some problem, it displays error messages. Refer to Troubleshooting guide. 18 Customer Care Center 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

18
Customer Care Center
1-800-898-1879
www.askousa.com
Selecting options
Note!
Time change is available only with Manual
dry, Dry Time and Rack dry programs.
Damp Signal
When you select the Damp Signal option,
a beep will alert you when your load is just
damp enough for ironing or pressing. This
notice will allow you to remove lightweight
items that are dried or other items that you
may wish to iron.
Anti-crease
This option helps to prevent wrinkles on
your laundry. When you select the Anti-
crease option, the drum will periodically
rotate until you press the Power button,
Start/Stop button, or open the door. You
can use this option in case you cannot
remove laundry immediately after drying is
done.
Delay Start
When you select Delay Start, the machine
will start between 1 and 12 hours after you
press the Start/Stop button.
Press the Delay Start button the same
number of times as the number of hours
by which you want to delay the start
(1~12 hours).
The number of hours of delay start
you have selected will be shown in the
display.
Press the Start/Stop button.
The number of hours to start is
displayed with a countdown one hour at
a time.
Cancel Delay Start by pressing power
button and turning the machine off.
Turn the power back on, select a
program and press the Start/Stop
button.
Note!
Remember to press the Start/Stop button
to start the program.
Child Lock *
The child lock option can be used to
prevent a child from pausing or cancelling a
dry program once it has been started.
To set this option, you must first select
a dry program and any desired options.
Press the Start/Stop button to start the
cycle. Next, press the Child lock button for
3 seconds to engage the Child lock option.
Child lock will be lit up as long as the
option is active. To cancel this mode, hold
the Child lock button again for 3 seconds,
and turn off the main power button. You
will have to set the Child Lock option at
the beginning of every cycle you choose to
have protected.
Estimated Time Remaining
The display shows the estimated time
remaining. In addition to this, if the dryer
has some problem, it displays error
messages. Refer to Troubleshooting guide.