Asus A7V400-MX Motherboard DIY Troubleshooting Guide - Page 56

PS2KB Wakeup Select [Hot Key] This parameter allows you to use specific keys on the keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Hot key] [Password] PS2KB Wakeup Password [Clear] This item appears when you select password as the wakeup method for the PS/2 keyboard. Highlight this item then press to enter an 8-digit password. When the password is activated, the system wakes up from a keyboard stroke only after you enter the correct password. To disable the password, highlight this item again, then press twice. A PASSWORD DISABLED! message appears indicating that you have successfully disabled the password. The PS2KB Wakeup from S3/S4/S5 and thePS2MS Wakeup from S3/S4/S5 are not configurable if you set the PS2KB Wakeup Select item to password mode. PS2KB Wakeup from S3/S4/S5 [Disabled] When set to [Enabled], this parameter allows you to use the PS/2 keyboard to turn on the system. Configuration options: [Disabled] [Enabled] PS2MS Wakeup from S3/S4/S5 [Disabled] When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the system. This requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] USB Resume from S3/S4 [Disabled] Configuration options: [Disabled] [Enabled] Modem Ring Resume [Disabled] This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled] RTC Alarm Resume [Disabled] Allows you to enable or disable RTC to generate a wake event. When this item is enabled, the Date and Resume Time fields are activated for manual setup. Configuration options: [Disabled] [Enabled] 2-24 Chapter 2: BIOS information