Asus A8N-VM A8N-VM English Manual E2230 - Page 20

System memory

Page 20 highlights

1.7 System memory 1.7.1 Overview The motherboard comes with four 184-pin Double Data Rate (DDR) Dual Inline Memory Modules (DIMM) sockets. The following figure illustrates the location of the sockets: A8N-VM DIMM_A2 DIMM_A1 DIMM_B2 DIMM_B1 ® A8N-VM 184-pin DDR DIMM sockets Channel Channel 1 Channel 2 Sockets DIMM_A1 and DIMM_B1 DIMM_A2 and DIMM_B2 1.7.2 Memory configurations You may install 128 MB, 256 MB, 512 MB, and 1 GB unbuffered ECC/ non-ECC DDR DIMMs into the DIMM sockets using the memory configurations in this section. • Installing DDR DIMMs other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations on the next page. • Install only identical (the same type and size) DDR DIMM pairs for each channel. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Due to chipset limitation, this motherboard does not support DIMM modules with less than or equal to 128 Mb memory chips. • If you are installing only one DIMM module for a Single-channel configuration, install the module on DIMM_A1 (blue slot). 1-10 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

1-10
1-10
1-10
1-10
1-10
Chapter 1: Product introduction
Chapter 1: Product introduction
Chapter 1: Product introduction
Chapter 1: Product introduction
Chapter 1: Product introduction
1.7
System memory
1.7.1
1.7.1
1.7.1
1.7.1
1.7.1
Overview
Overview
Overview
Overview
Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1.7.2
1.7.2
1.7.2
1.7.2
1.7.2
Memory configurations
Memory configurations
Memory configurations
Memory configurations
Memory configurations
You may install 128 MB, 256 MB, 512 MB, and 1 GB unbuffered ECC/
non-ECC DDR DIMMs into the DIMM sockets using the memory configurations
in this section.
Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations on the next page.
Install only identical (the same type and size) DDR DIMM pairs for
each channel.
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor.
Due to chipset limitation, this motherboard does not support DIMM
modules with less than or equal to 128 Mb memory chips.
If you are installing only one DIMM module for a Single-channel
configuration, install the module on DIMM_A1 (blue slot).
A8N-VM
A8N-VM 184-pin DDR DIMM sockets
DIMM_A2
DIMM_A1
DIMM_B2
DIMM_B1
Channel
Channel
Channel
Channel
Channel
Sockets
Sockets
Sockets
Sockets
Sockets
Channel 1
DIMM_A1 and DIMM_B1
Channel 2
DIMM_A2 and DIMM_B2