Asus A8N-VM A8N-VM English Manual E2230 - Page 34
pin CPU_FAN, 3-pin CHA_FAN
View all Asus A8N-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
GND +12V Rotation A8N-VM 5. CPU and Chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. CPU_FAN CPU_FAN CHA_FAN CHA_FAN ® A8N-VM Fan connectors 6 . Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. GND +12V Rotation A8N-VM +5V SPDIFOUT GND ® SPDIF_OUT A8N-VM Digital audio connector 1-24 Chapter 1: Product introduction