Asus A8V A8V-VM User's Manual for English Edition - Page 41
A8V-VM Analog Front Panel Connector, A8V-VM Chassis Intrusion Connector
View all Asus A8V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC `97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP Azalia compliant Legacy AC 97 definition compliant definition AGND +5VA Back line out R Back line out L GND PRESENCE# SENSE1_RETUR SENSE2_RETUR AGND +5VA Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L A8V-VM R A8V-VM Analog Front Panel Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard highdefinition audio capability. • If you want to connect a high-definition front panel audio module to this connector, make sure the Audio Controller item in the BIOS is set to [Enabled]. See page 2-22 for details. 10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. +5VSB_MB Chassis Signal GND A8V -VM R CHASSIS (Default) A8V-VM Chassis Intrusion Connector ASUS A8V-VM 1-29