Asus A8V A8V-VM User's Manual for English Edition - Page 42
Power LED Green 3-pin PLED
View all Asus A8V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
11. System panel connector (20-1 pin PANEL) This connector supports several chassis-mounted functions. PLED SPEAKER PLED+ PLED+5V Ground Ground Speaker PANEL IDE_LED+ IDE_LED- PWR Ground Reset Ground A8V-VM R IDE_LED RESET PWRSW * Requires an ATX power supply. A8V-VM System Panel Connector The sytem panel connector is color-coded for easy connection. Refer to the connector description below for details. • Power LED (Green 3-pin PLED) This 3-pin connector is for the Power LED. Connect the 3-pin power LED cable from the system chassis to this connector. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • System warning speaker (Orange 4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. • Hard disk drive activity LED (Red 2-pin IDELED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (Yellow 2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds turns the system OFF. • Reset button (Blue 2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power(ATX power). 1-30 Chapter 1: Product introduction