Asus AAM6030BI User Manual

Asus AAM6030BI Manual

Get Asus AAM6030BI PDF manuals and user guides View all Asus AAM6030BI manuals
Add to My Manuals
Save this manual to your list of manuals

Asus AAM6030BI manual content summary:

  • Asus AAM6030BI | User Manual - Page 1
    AAM6030BI CPE User Manual AAM6030BI User Manual Rev. 1.00 Version date: Oct. 20, 2004
  • Asus AAM6030BI | User Manual - Page 2
    AAM6030BI User Manual Table of ADSL line 7 3.1.2 Connect the computers or a LAN 7 3.1.3 Attach the power adapter 7 3.1.4 Turn on your computer Modem setup 19 4.5 Configuring the LAN 20 4.5.1 Enable/Disable DHCP 20 4.5.2 Changing the CPEs IP address 21 4.5.3 Firewall/NAT Services
  • Asus AAM6030BI | User Manual - Page 3
    AAM6030BI User Manual 4.7.1 System Commands 32 4.7.2 Remote Log 32 4.7.3 User Management 32 4.7.4 Update Gateway 33 4.7.5 Ping Test 33 4.7.6 Modem Test 34 4.8 Status 34 4.8.1 Network Statistics 34 4.8.2 Connection Status 34 4.8.3 DHCP Clients 34 4.8.4 Modem Status 34 4.8.5
  • Asus AAM6030BI | User Manual - Page 4
    Downloadable flash software upgrades • Support for up to 8 Permanent Virtual Circuits (PVC) • Support The modem must support the support. z System Requirements In order to use the AAM6030BI CPE for Internet access, you must have the following: f ADSL service subscription from your ISP. f One computer
  • Asus AAM6030BI | User Manual - Page 5
    AAM6030BI User Manual flickering, it is an indication that the modem is training. z Activity LED: The Activity LED flash during ADSL data transfer. z LAN 1~4 LED: parts list z LED Table The LEDs can help diagnose problems. If you are using an AAM6030BI CPE, you will have the LEDs shown in Table 1
  • Asus AAM6030BI | User Manual - Page 6
    AAM6030BI User Manual z Parts List In addition to this document, your AAM6030BI should come with the following: f AAM6030BI ADSL 4 Port Router f Power adapter f Ethernet cable (RJ45), Phone cable (RJ-11) f User Manual CD 6 6
  • Asus AAM6030BI | User Manual - Page 7
    AAM6030BI User Manual 3. Getting Start This chapter provides basic instructions for connecting the CPE to a computer or a LAN and to the Internet via ADSL. f Part 1 provides instructions to set up the hardware. f Part 2 describes how to configure Internet properties on your computer(s). f Part 3
  • Asus AAM6030BI | User Manual - Page 8
    AAM6030BI User Manual 3.2 Configuring Your PC Before you start to access the CPE CPE's default IP address is 192.168.1.1. If you use Ethernet cable to connect your AAM6030BI and PC, you don't need any specific driver installation. 3.2.1 Windows XP: 1. In the Windows task bar, click on the Start
  • Asus AAM6030BI | User Manual - Page 9
    AAM6030BI User Manual The Local Area Connection Properties dialog box is displayed with a your Windows 2000 installation CD or other media. Follow the instructions to install the files. 7. If prompted, click on to restart your computer with the new settings. 8. After restarting your PC, double
  • Asus AAM6030BI | User Manual - Page 10
    AAM6030BI User Manual 8. If prompted, click on to restart your computer with the new settings. 9. After restarting You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to install the files. 7. Click on to restart the PC and complete the TCP/IP
  • Asus AAM6030BI | User Manual - Page 11
    AAM6030BI User Manual 3.2.5 Windows NT 4.0: 1. In the Windows NT task bar, click on the the instructions to install the files. After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can be set up to dynamically assign IP information. 6. Click on computer.
  • Asus AAM6030BI | User Manual - Page 12
    AAM6030BI User Manual 4. Setting up your CPE This section will guide you through your CPE's configuration. The CPE is shipped with a standard default bridge configuration; for most users, you may want to change the CPE from a
  • Asus AAM6030BI | User Manual - Page 13
    AAM6030BI User Manual 4.3 Setup Figure 2 (Home page) To setup your CPE with a basic configuration, from the Home page, select Setup. Figure 3 illustrates the setup page. The page is
  • Asus AAM6030BI | User Manual - Page 14
    AAM6030BI User Manual is where you plug in your local computers to the router. The router is normally WAN side of the modem must be configured. Depending upon your DSL service provider or your ISP, is basically a virtual connection. Your CPE can support up to 8 different (unique) virtual connections.
  • Asus AAM6030BI | User Manual - Page 15
    AAM6030BI User Manual and VCI settings; your DSL service provider or your ISP will supply these; in this case the DSL service provider is using 0,35. Also select the quality of service Contact your ISP to make sure which encapsulation is being supported. By selecting PPPoA, you are forcing your CPE
  • Asus AAM6030BI | User Manual - Page 16
    AAM6030BI User Manual c. On-Demand: Enables on-demand mode. The connection will disconnect if no activity is detected after the specified you are not sure just use the default mode. Select the VPI and VCI settings; your DSL service provider or your ISP will supply these; in this case the DSL 16 16
  • Asus AAM6030BI | User Manual - Page 17
    AAM6030BI User Manual service provider is using 0,30. Also select the quality of service (QOS); leave the default value if you minimum MRU value is 128. h. Enforce MRU: Check this box if you experience problems accessing the Internet over a PPPoE connection. This feature will force all TCP traffic to
  • Asus AAM6030BI | User Manual - Page 18
    AAM6030BI User Manual 4.4.1.4 DHCP Connection Setup Dynamic Host service provider is using 0,35. Also select the quality of service (QOS); leave the default value if you are unsure or the ISP did not provide this information. If your DSL line is connected and your DSL/IPS provider is supporting
  • Asus AAM6030BI | User Manual - Page 19
    AAM6030BI User Manual name; the name must not have spaces and cannot begin with numbers. In this case the unique name is called STATIC1. Select the encapsulation type (LLC or VC); if you are not sure just use the default mode. Select the VPI and VCI settings; your DSL service provider or your ISP
  • Asus AAM6030BI | User Manual - Page 20
    AAM6030BI User Manual 4.5 Configuring the LAN By default, your CPE has DHCP server (LAN CPEs IP address. Figure 9 (DHCP Server configuration) In addition to the DHCP server feature, the CPE supports the DHCP relay function. When the CPE is configured as DHCP server, it assigns the IP addresses to
  • Asus AAM6030BI | User Manual - Page 21
    AAM6030BI User Manual Figure 10 (Example of a DHCP Relay configuration) By turning off the DHCP server and relay the network administrator must carefully configure the IP address, Subnet Mask and DNS settings of every computer the CPE to support 254 users. If you want to support a larger number
  • Asus AAM6030BI | User Manual - Page 22
    AAM6030BI User Manual Figure 11 (Management IP address) The apply button will temporarily save this connection. To make the change permanent you need to click on Tools (at the top of the page) and select System Commands. At the system commands page, click on Save All. 4.5.3 Firewall/NAT Services
  • Asus AAM6030BI | User Manual - Page 23
    AAM6030BI User Manual 4.6.1 UPnP UPnP NAT and Firewall Traversal allow traffic to pass-thru the router for applications using the UPnP protocol. This feature requires one active DSL
  • Asus AAM6030BI | User Manual - Page 24
    AAM6030BI User Manual The apply button will temporarily save this connection. To make the the Home screen, click Advanced and under Advanced, select Port Forwarding. Next select the computer hosting the service and add the corresponding firewall rule. If you want to add a custom application, select
  • Asus AAM6030BI | User Manual - Page 25
    AAM6030BI User Manual Figure 13 (Port Forwarding & Netmeeting) The apply button will temporarily connections. For e.g. Choose a WAN connection to enable IP QoS for the Upstream traffic of the Modem. On the other hand choose the LAN connection (Ethernet and USB Bridged) for the downstream traffic.
  • Asus AAM6030BI | User Manual - Page 26
    AAM6030BI User Manual Figure 14 (IP QoS) IP Filters This firewall feature allows you to block network access based on a user's computer IP address. You can use this page to block specific traffic (for example block web access) or any traffic from a computer on your local network. To configure an IP
  • Asus AAM6030BI | User Manual - Page 27
    AAM6030BI User Manual or deny) is performed. The user should note that the bridge filter will only examined frames from interfaces which are part of the bridge itself. Twenty filter rules are supported with bridge filtering. To enable Bridge Filters, from the Home screen, click Advanced and under
  • Asus AAM6030BI | User Manual - Page 28
    AAM6030BI User Manual 4.6.7 Multicast/IGMP Snooping Multicasting is a form of limited broadcast. UDP is used to send datagrams to all hosts that belong to what is called a "host
  • Asus AAM6030BI | User Manual - Page 29
    AAM6030BI User Manual Figure 16-2 (IGMP SNOOPING) 4.6.8 Static Routing If the CPE is connected to more than one network, you may need to set up a static route between
  • Asus AAM6030BI | User Manual - Page 30
    AAM6030BI User Manual Figure 17 (Static Routing) The apply button will temporarily save this RIP information and send out updated RIP information. The protocol is dependent upon the entire network. Most networks support Rip v1. If RIP v1 is selected, routing data will be sent in RIP v1 format. If
  • Asus AAM6030BI | User Manual - Page 31
    AAM6030BI User Manual Figure 18 (Dynamic Routing) The apply button will temporarily save this connection. To make the change permanent you need to click on Tools (at the
  • Asus AAM6030BI | User Manual - Page 32
    AAM6030BI User Manual 4.7 Tools The CPE supports a host of tools which will allow you to customize and if you want to log the connection information. This is helpful when trying to debug connection problems. The remote log feature will forward all logged information to the remote PC. The type of
  • Asus AAM6030BI | User Manual - Page 33
    AAM6030BI User Manual The apply button will temporarily save this connection. To make the change permanent you need to click on Tools (at the top of the page) and select System Commands. At the system commands page, click on Save All. 4.7.4 Update Gateway You can remotely upgrade the CPE's firmware
  • Asus AAM6030BI | User Manual - Page 34
    AAM6030BI User Manual Figure 20 (Ping test) 4.7.6 Modem Test The Modem Test is used to check whether your Modem Also the DSLAM must support this feature; not all DSLAMs have F4 and F5 support. 4.8 Status The view the list of DHCP clients. 4.8.4 Modem Status Select to view the Status and Statistics
  • Asus AAM6030BI | User Manual - Page 35
    AAM6030BI User Manual 4.8.6 System Log You can display the CPE's log by going to the Home screen, under the Status title, click System log. From here you can
  • Asus AAM6030BI | User Manual - Page 36
    AAM6030BI User Manual 5. Appendix A: Troubleshooting Below is a list of commonly asked questions. Before calling technical support, please look through these issues to see if they help solve your problem your PC. Again, refer to the quick start guide for more details 6. Check the CPE's settings.
  • Asus AAM6030BI | User Manual - Page 37
    AAM6030BI User Manual 5.4 The DSL Link LED continues to blink but does not from the central office. Contact your DSL service provider for further assistance. Common Problems and Solutions 5.5 The DSL Link LED is always off 1. Make sure you have DSL service. You should get some kind of information
  • Asus AAM6030BI | User Manual - Page 38
    AAM6030BI User Manual email, downloading a file trouble. The router contains special functionality to handle the vast majority of these troublesome programs and games. NAT does cause problems level of service. To problem of supporting a large number of stations, but introduces the problem computer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
AAM6030BI CPE User Manual
AAM6030BI
User Manual
Rev. 1.00
Version date: Oct. 20, 2004