Asus AT4NM10T-I User Manual - Page 22
Asus AT4NM10T-I Manual
View all Asus AT4NM10T-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4. This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Chassis intrusion connector (4-1 pin CHASSIS) CHASSIS Chassis Signal GND +5VSB_MB PIN 1 AT4NM10T-I Chassis intrusion connector 5. The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. Internal speaker connector (4-pin SPEAKER) AT4NM10T-I SPEAKER +5V GND GND Speaker Out AT4NM10T-I Speaker Out Connector ASUS AT4NM10T-I AT4NM10T-I 1-12