Asus B150 PRO GAMING/AURA B150 PRO GAMING/AURA Users manual English - Page 28
B150 PRO GAMING/AURA T_SENSOR connector
View all Asus B150 PRO GAMING/AURA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. A A EATX12V B EATXPWR GND GND GND GND PIN 1 B +12V DC +12V DC +12V DC +12V DC +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts B150 PRO GAMING/AURA ATX power connectors • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. • DO NOT forget to connect the 4-pin/8-pin ATX +12V power plug. Otherwise, the system will not boot up. • We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. 6. Thermal sensor connector (2-pin T_SENSOR) This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard's critical components and connected devices. T_SENSOR GND PIN 1 SENSOR IN B150 PRO GAMING/AURA T_SENSOR connector 1-20 Chapter 1: Product introduction