Asus CUV266 CUV266 User Manual - Page 34

Internal Connectors

Get Asus CUV266 PDF manuals and user guides View all Asus CUV266 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

3. H/W SETUP Connectors 3. HARDWARE SETUP 3.8.2 Internal Connectors 1) IDE Activity LED (2-pin IDELED) This connector supplies power to the cabinet's IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors cause the IDE LED to light up. CUV266 01 01 01 CUV266 IDE Activity LED IDELED TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. 2) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). CUV266 01 01 01 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1 PIN 1 CUV266 Floppy Disk Drive Connector 34 ASUS CUV266 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
34
ASUS CUV266 User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
3.8.2
Internal Connectors
1)
IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s IDE activity LED.
Read and
write activity by devices connected to the Primary or Secondary IDE connectors
cause the IDE LED to light up.
2)
Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives.
(Pin 5 is removed to prevent inserting in the wrong orientation when
using ribbon cables with pin 5 plugged).
CUV266 IDE Activity LED
TIP:
If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
CUV266
0
1
0
1
0
1
NOTE:
Orient the red markings on
the floppy ribbon cable to
PIN 1
CUV266 Floppy Disk Drive Connector
PIN 1
CUV266
0
1
0
1
0
1