Asus E3-PRO V5 E3-PRO V5 Users manual English - Page 11

• We recommend that you use an EATX 12V Specification 2.0‑compliant power supply unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 8-pin power plugs. EATX12V GND GND GND GND PIN 1 +12V DC +12V DC +12V DC +12V DC • DO NOT forget to connect the 8-pin EATX +12V power plug. Otherwise, the system will not boot up. • We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate. EATXPWR +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus.com/ PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. 3. Intel® LGA1151 CPU socket This motherboard comes with a surface mount LGA1151 socket designed for Intel® Xeon® E3-1200 v5 series, 6th Generation Intel® Core™, Pentium®,and Celeron® processors. For more details, refer to Central Processing Unit (CPU). 4. DDR4 DIMM slots Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered U-DIMM ECC DDR4 DIMMs into these DIMM sockets. For more details, refer to System memory. 5. Intel® C232 SATA 6.0Gb/s ports (7-pin SATA6G_1~6) These ports connect to SATA 6.0 Gb/s hard disk drives via SATA 6.0 Gb/s signal cables. When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. SATA6G GND RSATA_TXP RSATA_TXN GND RSATA_RXN RSATA_RXP GND 6. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. M.2(SOCKET3) ASUS E3-PRO V5 1-3