Asus E3-PRO V5 E3-PRO V5 Users manual English - Page 9

Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1.2 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Motherboard overview 12 13 4 21.8cm(8.6in) KBMS USB910 EATX12V CPU_FAN DIGI +VRM DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_A2 (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) DDR4 DIMM_B2 (64bit, 288-pin module) Place this side towards the rear of the chassis USB78 USB3_56 LGA1151 30.5cm(12.0in) EATXPWR SATA6G_2 SATA6G_1 CHA_FAN2 2 LAN_USB3_34 1 M.2(SOCKET3) LANGuard CHA_FAN1 AUDIO 2280 2260 2242 5 15 PCIEX1_1 16 E3-PRO V5 RTL PCIEX16_1 6 8111H 14 ASM PCI1 1083 14 16 15 14 PCI2 Intel® C232 Super I/O PCIEX16_2 ALC887 -VD2 PCIEX1_2 BATTERY SPDIF_OUT AAFP PCI3 COM USB1112 USB3_12 CLRTC PANEL 128Mb BIOS 7 5 13 12 11 10 9 8 Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. ASUS E3-PRO V5 1-1