Asus H170-PLUS D3 User Guide - Page 68
Onboard Devices Configuration, APM Configuration
View all Asus H170-PLUS D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2.6.7 Onboard Devices Configuration HD Audio Controller [Enabled] [Enabled] Enables the HD Audio Device. [Disabled] Disables the HD Audio Device. The following two items appear only when you set the HD Audio Controller item to [Enabled]. Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] [HDMI] Sets to an SPDIF audio output. Sets to an HDMI audio output. Realtek LAN Controller [On] [On] Enables the Realtek LAN controller. [Off] Disables the controller. Realtek PXE Option ROM [Off] This item appears only when you set the previous item to [On] and allows you to enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [On] [Off] Serial Port Configuration The sub-items in this menu allow you to set the serial port configuration. Serial Port [On] Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off] Change Settings [IO=3F8h; IRQ=4] This item appears only when you set the Serial Port to [On] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] 2.6.8 APM Configuration Deep S4 [Disabled] When the system enters the S4 state and this item is set to [Enabled], the system will be put to deep S4 sleep state to reduce power consumption. The system in deep S4 state can only be woken up via the power button. Configuration options: [Disabled] [Enabled] 2-34 Chapter 2: Getting started