Asus K8N K8N User Guide - Page 32
Chassis intrusion connector 4-1 pin CHASSIS, Front panel audio connector 10-1 pin FP_AUDIO
View all Asus K8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
AGND +5VA BLINE_OUT_R BLINE_OUT_L MIC2 MICPWR Line out_R NC Line out_L 7. Front panel audio connector (10-1 pin FP_AUDIO) This is an interface for the front panel cable that allows convenient connection and control of audio devices. Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable. FP_AUDIO ® K8N K8N Front panel audio connector 8. Chassis intrusion connector (4-1 pin CHASSIS) This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. CHASSIS ® K8N (Default) K8N Chassis intrusion connector +5VSB_MB Chassis Signal GND 1-22 Chapter 1: Product introduction