Asus K8N K8N User Guide - Page 60
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
View all Asus K8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state whatever was the system state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] 2.5.6 Hardware Monitor Hardware Monitor MB Temperature CPU Temperature CPU Fan Speed Chassis Fan Speed Power Fan Speed VCORE Voltage 3.3V Voltage 5V Voltage 12V Voltage Smart Q-Fan Control [35ºC/95ºF] [48ºC/118ºF] [3260RPM] [N/A] [N/A] [ 1.520V] [ 3.280V] [ 5.086V] [11.742V] [Disabled] CPU Temperature MB Temperature [xxx ºC/xxx ºF] CPU Temperature [xxx ºC/xxx ºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Disabled if you do not wish to display the detected temperatures. CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Power Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU, chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific field shows N/A. VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. 2-26 Chapter 2: BIOS Setup