Asus M3A User Manual - Page 50
This connector is for an additional Sony/Philips Digital Interface S/PDIF
UPC - 610839156696
View all Asus M3A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. M3A +5VSB_MB Chassis Signal GND ® CHASSIS M3A Chassis intrusion connector (Default) 7. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. SPDIF_OUT ® M3A +5V SPDIFOUT GND M3A Digital audio connector The S/PDIF module is purchased separately. 2-28 Chapter 2: Hardware information