Asus M3A User Manual - Page 80

2T Mode [Auto] Allows selection of the 2T Mode. Configuration options: [Auto] [Disabled] [Enabled] DRAM Timing Mode [Auto] Allows selection of the DRAM Timing Mode. Configuration options: [Auto] [DCT 0] The following sub-items appear only when you set the DRAM Timing Mode item to [DCT 0]. CAS Latency (CL) [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only] TRCD [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRP [Auto] [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRAS [Auto] Configuration options: [Auto] [5 CLK] [6 CLK] ~ [17 CLK] [18 CLK] 4.4.2 AI NET 2 This menu displays the status of the Local Area Network (LAN) cable connected to the LAN (RJ-45) port. BIOS SETUP UTILITY Tools AI NET 2 Pair Status Length Atheros Check LAN cable during POST. 1-2N/A 3-6N/A 4-5N/A 7-8N/A Atheros Controller 0 Atheros POST Check LAN cable [Disabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. Atheros POST Check LAN cable [Disabled] Allows you to enable or disable LAN cable check during POST. When enabled, the menu reports the cable faults or shorts, and displays the point (length) where the faults or shorts are detected. Configuration options: [Disabled] [Enabled] 4-20 Chapter 4: BIOS setup