Asus M4A77T M4A77T user's manual - Page 54

2.5 Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Advanced Power BIOS SETUP UTILITY Boot Tools Exit Select the ACPI state used for System Suspend. Power Settings Suspend Mode ACPI 2.0 Support ACPI APIC support APM Configuration HW Monitor Configuration [Auto] [Enabled] [Enabled] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. 2.5.1 Selecta the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto] Suspend Mode [Auto] 2.5.2 Enables or disables the Advanced Configuration and Power Interface (ACPI) 2.0 support. Configuration options: [Disabled] [Enabled] ACPI 2.0 Support [Enabled] 2.5.3 Enables or disables the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When this item is set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] ACPI APIC Support [Enabled] 2.5.4 APM Configuration Restore on AC Power Loss [Always Off] When this item set to [Always Off], the system goes into off state after an AC power loss. When this item set to [Always On], the system goes on after an AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power on From S5 By PME# [Disabled] Power on From S5 By Ring [Disabled] Enables or disables PME wake from sleep states. Configuration options: [Disabled] [Enabled] Enables or disables ring to generate a wake event. Configuration options: [Disabled] [Enabled] 2-16 Chapter 2: BIOS information