Asus M4A78-HTPC User Manual - Page 56

PCIE Clock [xxx] This item appears only when you set the PCIE OverClocking item to [Manual] and allows you to manually set the PCIE frequency. Use the and keys to adjust the value. You can also type the desired value using the numeric keypad. The values range from 100 to 150. Processor Frequency Multiplier [Auto] Allows you to adjust the ratio between CPU Core Clock and FSB Frequency. Configuration options: [Auto] [x8.0 1600 MHz] [x8.5 1700 MHz] [x9.0 1800 MHz] [x9.5 1900 MHz] [x10.0 2000 MHz] [x10.5 2100 MHz] [x11.0 2200 MHz] [x11.5 2300 MHz] Processor Voltage [Auto] Allows you to set the CPU VCore voltage. Configuration options: [Auto] [+ 50mv] [+ 100mv] [- 100mv] Processor-NB Voltage [Auto] Allows you to set the voltage between the CPU and Northbridge. Configuration options: [Auto] [+ 50mv] [+ 100mv] [- 100mv] Hyper Transport Speed [Auto] Allows you to set the CPU-Northbridge HyperTransport link speed. Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [1.2 GHz] [1.4 GHz] [1.6 GHz] [1.8 GHz] [Auto] Hyper Transport Width [Auto] Allows you to set the CPU-Northbridge HyperTransport link width. Configuration options: [Auto] [4 Bit] [8 Bit] [16 Bit] Memory Clock Mode [Auto] Allows you to select the DRAM frequency control method. Configuration options: [Auto] [Manual] Memclock Value [xxx] This item appears only when you set the Memory Clock Mode item to [Manual] and allows you to manually set the DRAM frequency. Configuration options: [667MHz] [800MHz] [1067MHz] DRAM Timing Mode [Auto] Allows selection of the DRAM Timing Mode. Configuration options: [Auto] [Both] The following sub-items appear only when you set the DRAM Timing Mode item to [Both]. CAS Latency (CL) [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only] TRCD [Auto] Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto] TRP [Auto] Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto] 2-10 ASUS M4A78-HTPC