Asus M4A79 DELUXE User Manual - Page 75

3.5.9 DRAM Timing Configuration Ai Tweaker DRAM Timing Configuration DRAM Command Rate DRAM Timing Mode [Auto] [Auto] DCT0/DCT1 Strength Config. [Auto] DRAM Command Rate: 1T: DRAM address and control signals are driven for one MEMCLK cycle. Chapter 3 The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard. DRAM Command Rate [Auto] Configuration options: [Auto] [1T] [2T] DRAM Timing Mode [Auto] Configuration options: [Auto] [Both] The following sub-items appear only when you set the DRAM Timing Mode item to [Both]. TCL [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only] TRCD [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRP [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRTP [Auto] Specifies the read CAS# to precharge time. Configuration options: [Auto] [2-4 CLK] [3-5 CLK] TRAS [Auto] Configuration options: [Auto] [5 CLK] [6 CLK] - [17 CLK] [18 CLK] TRC [Auto] Configuration options: [Auto] TWR [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRRD [Auto] Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] TWTR [Auto] Specifies the write to read delay when accessing the same DIMM. Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK] TRFC0/TRFC1 [Auto] Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns] DCT0/DCT1 Strength Config. [Auto] Configuration options: [Auto] [DCT 0] [DCT 1] [Both] ASUS M4A79 Deluxe 3-15