Asus M4A88T-V EVO User Manual - Page 36
Internal connectors - usb3 cpu support
View all Asus M4A88T-V EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1.10.2 Internal connectors 1. CPU, chassis, and power fan connectors (4-pin CPU_FAN; 4-pin CHA_FAN1; 3-pin CHA_FAN2; 3-pin PWR_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU FAN PWM CPU FAN IN CPU FAN PWR GND M4A88T-V EVO/USB3 PWR_FAN GND +12V Rotation CHA_FAN1 CHA_FAN2 CPU FAN PWM CPU FAN IN CPU FAN PWR GND GND +12V Rotation M4A88T-V EVO/USB3 fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. • The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power. • Only the 4-pin CPU fan and chassis fan support the ASUS Fan Xpert feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN 1/2 for better thermal environment. 1-24 Chapter 1: Product introduction