Asus M4N68T V2 User Manual - Page 33
M4N68T V2 Series SATA connectors - v2 manual
View all Asus M4N68T V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, and SATA4) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the standard parallel ATA with 133MB/s (Ultra DMA133). If you install Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, or RAID 0+1 set through the onboard chipset. M4N68T V2 Series SATA1 SATA2 SATA3 SATA4 GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND M4N68T V2 Series SATA connectors • Install the Windows® XP Service Pack 2 or later versions before using Serial ATA. • If you intend to create a SATA RAID set, set the nVidia RAID Function item in the BIOS to [Enabled]. See 2.3.3 IDE Configuration for details. • The motherboard does not provide a floppy disk drive connector. You could use a USB floppy disk drive when installing Windows® XP operating system on a hard disk drive that includes a RAID/AHCI set. • Due to Windows® XP limitation, Windows® XP may not recognize some USB floppy disk drives. • For more details on RAID/AHCI, refer to the RAID/AHCI Supplementary Guide included in the folder named Manual in the support DVD. ASUS M4N68T V2 Series 1-23