Home » Asus Manuals » Motherboards » Asus M4N68T V2 » Manual Viewer

Asus M4N68T V2 User Manual - Page 53

Legacy USB Support [Auto], USB 2.0 Controller Mode [HiSpeed], USB Mass Storage Reset Delay [20 Sec]

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Legacy USB Support [Auto] Allows you to enable or disable support for Legacy USB storage devices, including USB flash drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed (12Mbps). Configuration options: [FullSpeed] [HiSpeed] The following items only appear when a USB storage device is plugged in. USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Sets the maximum time that the BIOS waits for the USB storage device to initialize. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec] Emulation Type [Auto] Allows you to set the emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] ASUS M4N68T V2 Series 2-15

Section	Page
Notices	6
About this guide	7
Safety information	7
M4N68T V2 Series specifications summary	9
Chapter 1	11
Product introduction	11
1.1 Welcome!	11
1.2 Package contents	11
1.3 Special features	11
1.3.1 Product highlights	11
1.3.2 Innovative ASUS features	13
1.4 Before you proceed	14
1.5 Motherboard overview	15
1.5.1 Placement direction	15
1.5.2 Screw holes	15
1.5.3 Motherboard layout	16
1.5.4 Layout contents	17
1.6 Central Processing Unit (CPU)	17
1.6.1 Installing the CPU	17
1.6.2 Installing the heatsink and fan	19
1.7 System memory	20
1.7.1 Overview	20
1.7.2 Memory configurations	21
1.7.3 Installing a DIMM	25
1.7.4 Removing a DIMM	25
1.8 Expansion slots	26
1.8.1 Installing an expansion card	26
1.8.2 Configuring an expansion card	26
1.8.3 PCI slots	26
1.8.4 PCI Express x1 slots	26
1.8.5 PCI Express x16 slot	26
1.9 Jumpers	27
1.10 Connectors	29
1.10.1 Rear panel ports	29
1.10.2 Internal connectors	30
1.11 Software support	37
1.11.1 Installing an operating system	37
1.11.2 Support DVD information	37
Chapter 2	39
BIOS information	39
2.1 Managing and updating your BIOS	39
2.1.1 ASUS Update	39
2.1.2 ASUS EZ Flash 2	40
2.1.3 ASUS CrashFree BIOS 3	41
2.2 BIOS setup program	42
2.2.1 BIOS menu screen	43
2.2.3 Navigation keys	43
2.2.2 Menu bar	43
2.2.4 Menu items	44
2.2.5 Submenu items	44
2.2.6 Configuration fields	44
2.2.7 Pop-up window	44
2.2.8 Scroll bar	44
2.2.9 General help	44
2.3 Main menu	45
2.3.1 System Time	45
2.3.2 System Date	45
2.3.3 IDE Configuration	45
2.3.4 Primary IDE Master/Slave, SATA 1/2/3/4	46
2.3.5 System Information	47
2.4 Advanced menu	47
2.4.1 JumperFree Configuration	47
2.4.2 CPU Configuration	50
2.4.3 Chipset	50
2.4.4 Onboard Devices Configuration	52
2.4.5 PCIPnP	52
2.4.6 USB Configuration	52
2.5 Power menu	54
2.5.1 Suspend Mode	54
2.5.2 ACPI 2.0 Support	54
2.5.3 ACPI APIC Support	54
2.5.4 APM Configuration	54
2.5.5 HW Monitor Configuration	55
2.6 Boot menu	56
2.6.1 Boot Device Priority	56
2.6.2 Boot Settings Configuration	56
2.6.3 Security	57
2.7 Tools menu	58
2.7.1 ASUS EZ Flash 2	58
2.7.2 ASUS O.C. Profile	59
2.7.3 AI NET 2	59

Match case Limit results 1 per page

ASUS M4N68T V2 Series

2-15

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB ﬂash

drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Conﬁguration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to conﬁgure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed

(12Mbps). Conﬁguration options: [FullSpeed] [HiSpeed]

The following items only appear when a USB storage device is plugged in.

USB Mass Storage Device Conﬁguration

USB Mass Storage Reset Delay [20 Sec]

Sets the maximum time that the BIOS waits for the USB storage device to initialize.

Conﬁguration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Conﬁguration options: [Auto] [Floppy]

[Forced FDD] [Hard Disk] [CDROM]