Home » Asus Manuals » Motherboards » Asus M5A88-V EVO » Manual Viewer

Asus M5A88-V EVO User Manual - Page 69

OnChip SATA Speed [Auto], OnChip SATA Channel [Enabled] - raid drivers

Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

3.4.2 SATA Configuration The SATA Configuration menu allows you to configure your storage devices. Select an item then press to display the submenu. Main M5A88-V EVO BIOS Setup SATA Configuration OnChip SATA Speed OnChip SATA Channel SATA Port1 - Port4 SATA Port5 - Port6 [Auto] [Enabled] [IDE] [IDE] Version 0207 For the better HDD compatibility please set SB850 SATA speed to [SATA 3.0Gb/s] to support SATA 3.0Gb/s HDDs with Max. speed OnChip SATA Speed [Auto] [Auto] Allows automatic detection of the SATA speed. [SATA 3.0Gb/s] Set this item to [SATA 3.0Gb/s] if you installed 3.0Gb/s SATA HDDs on this motherboard. [SATA 6.0Gb/s] Set this item to [SATA 6.0Gb/s] if you installed 6.0Gb/s SATA HDDs on this motherboard. OnChip SATA Channel [Enabled] [Enabled] Enables the onboard channel SATA port. [Disabled] Disables the onboard channel SATA port. The following two items appear only when you set the OnChip SATA Channel item to [Enabled]. SATA Port1 - Port4 [IDE] Allows you to set the SATA configuration. [IDE] [RAID] [AHCI] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. • When this item is set to [AHCI], the information of the SATA connectors 1-6 can be seen under the OS environment or during POST. • For Windows® XP OS, you have to install the AHCI driver, so that you could use the SATA connectors 1-6 in AHCI mode under the OS environment. SATA Port5 - Port6 [IDE] Setting this item to [IDE] instead of [RAID] or [AHCI] allows the system to recognize the optical dirves connected to the SATA connectors 5 or 6 when installing OS. If you use a SATA optical drive to run the OS installation disk, we strongly recommend that you install the optical dirve to the SATA connectors 5/6 and set them to [IDE] mode. Chapter 3 ASUS M5A88-V EVO 3-13

Section	Page
Notices	7
Safety information	8
About this guide	9
M5A88-V EVO specifications summary	11
Chapter 1: Product introduction	15
1.1 Welcome!	15
1.2 Package contents	15
1.3 Special features	16
1.3.1 Product highlights	16
1.3.2 ASUS Hybrid Processor - TPU (TurboV Processing Unit)*	16
1.3.3 ASUS Xtreme Design—Hybrid Switches*	17
1.3.4 ASUS unique features	17
Chapter 2: Hardware information	19
2.1 Before you proceed	19
2.2 Motherboard overview	20
2.2.1 Motherboard layout	20
2.2.2 Layout contents	21
2.2.3 Placement direction	22
2.2.4 Screw holes	22
2.3 Central Processing Unit (CPU)	23
2.3.1 Installing the CPU	23
2.3.2 Installing the CPU heatsink and fan	25
2.4 System memory	28
2.4.1 Overview	28
2.4.2 Memory configurations	29
2.4.3 Installing a DIMM	30
2.4.4 Removing a DIMM	30
2.5 Expansion slots	31
2.5.1 Installing an expansion card	31
2.5.2 Configuring an expansion card	31
2.5.3 Interrupt assignments	32
2.5.4 PCI slots	33
2.5.5 PCI Express 2.0 x1 slot	33
2.5.6 PCI Express 2.0 x16 slots	33
2.6 Jumper	35
2.7 Onboard switches	36
2.8 Connectors	39
2.8.1 Rear panel connectors	39
2.8.2 Audio I/O connections	42
2.8.3 Internal connectors	44
2.8.4. ASUS Q-Connector (system panel)	52
2.9 Onboard LEDs	53
2.10 Starting up for the first time	55
2.11 Turning off the computer	55
Chapter 3: BIOS setup	57
3.1 Knowing BIOS	57
3.2 Updating BIOS	57
3.2.1 ASUS Update utility	58
3.2.2 ASUS EZ Flash 2 utility	60
3.2.3 ASUS CrashFree BIOS 3 utility	61
3.2.4 ASUS BIOS Updater	62
3.3 BIOS setup program	65
3.3.1 BIOS menu screen	65
3.3.2 Menu bar	65
3.3.3 Navigation keys	66
3.3.4 Menu items	66
3.3.5 Submenu items	66
3.3.6 Configuration fields	66
3.3.7 Pop-up window	66
3.3.8 Scroll bar	66
3.3.9 General help	66
3.4 Main menu	67
3.4.1 SATA6G_1/2/3/5/6, ESATA6G	67
3.4.2 SATA Configuration	69
3.4.3 System Information	70
3.5 Ai Tweaker menu	71
3.5.1 CPU Level UP [Auto]	72
3.5.2 CPU OverClocking [Auto]	72
3.5.3 CPU Ratio [Auto]	73
3.5.4 DRAM Frequency [Auto]	73
3.5.5 CPU/NB Frequency [Auto]	73
3.5.6 HT Link Speed [Auto]	74
3.5.7 GPU Booster [Enabled]	74
3.5.8 OC Tuner Utility	74
3.5.9 DRAM Timing Configuration	74
3.5.10 DRAM Driving Configuration	75
3.5.11 CPU & NB Voltage Mode [Offset]	76
2.5.12 CPU VDDA Voltage [Auto]	76
2.5.13 DRAM Voltage [Auto]	77
2.5.14 HT Voltage [Auto]	77
2.5.15 NB Voltage [Auto]	77
2.5.16 NB 1.1V Voltage [Auto]	77
2.5.17 NB 1.8V Voltage [Auto]	77
2.5.18 SB Voltage [Auto]	77
2.5.19 SidePort Memory Voltage [Auto]	77
2.5.20 CPU Load-Line Calibration [Auto]	77
2.5.21 CPU/NB Load-Line Calibration [Auto]	77
2.5.22 PCI/PCIe CLK Status [Enabled]	77
3.6 Advanced menu	78
3.6.1 CPU Configuration	78
3.6.2 Chipset	80
3.6.3 Onboard Devices Configuration	82
3.6.4 PCIPnP	83
3.6.5 USB Configuration	84
3.7 Power menu	85
3.7.1 Suspend Mode [Auto]	85
3.7.2 ACPI 2.0 Support [Enabled]	85
3.7.3 ACPI APIC Support [Enabled]	85
3.7.4 APM Configuration	86
3.7.5 HW Monitor Configuration	87
3.7.6 Anti Surge Support [Enabled]	88
3.7.7 NB Thermal Protect [Enabled]	88
3.8 Boot menu	89
3.8.1 Boot Device Priority	89
3.8.2 Boot Settings Configuration	90
3.8.3 Security	91
3.9 Tools menu	93
3.9.1 ASUS EZ Flash 2	93
3.9.2 ASUS O.C. Profile	93
3.10 Exit menu	95
Chapter 4: Software support	97
4.1 Installing an operating system	97
4.2 Support DVD information	97
4.2.1 Running the support DVD	97
4.2.2 Obtaining the software manuals	98
4.3 Software information	99
4.3.1 ASUS PC Probe II	99
4.3.2 ASUS AI Suite	100
4.3.3 ASUS Fan Xpert	101
4.3.4 ASUS EPU	102
4.3.5 Audio configurations	103
4.3.6 ASUS GPU Boost	104
4.3.7 Turbo Unlocker	105
4.4 ASUS Unique Overclocking Utility—TurboV EVO	106
4.4.1 Using ASUS TurboV	106
4.4.2 Using ASUS TurboV Auto Tuning Mode	107
4.4.3 Using CPU Level UP	108
4.4.4 Using ASUS Turbo Key	108
4.5 RAID configurations	109
4.5.1 RAID definitions	109
4.5.2 Installing Serial ATA hard disks	110
4.5.3 Setting the RAID item in BIOS	110
4.5.4 AMD® Option ROM Utility	111
4.6 Creating a RAID driver disk	114
4.6.1 Creating a RAID driver disk without entering the OS	114
4.6.2 Creating a RAID driver disk in Windows®	114
4.6.3 Installing the RAID driver during Windows® OS installation	114
4.6.4 Using a USB floppy disk drive	115
Chapter 5: ATI® CrossFireX™ technology support	117
5.1 ATI® CrossFireX™ technology	117
5.1.1 Requirements	117
5.1.2 Before you begin	117
5.1.3 Installing two CrossFireX™ graphics cards	118
5.1.4 Installing the device drivers	119
5.1.5 Enabling the ATI® CrossFireX™ technology	119
5.2 ATI® Hybrid CrossFireX™ technology	120
5.2.1 System requirements	120
5.2.2 Before you proceed	120
5.2.3 Installing AMD Chipset Driver	120

Match case Limit results 1 per page

ASUS M5A88-V EVO

3-13

Chapter 3

3.4.2

SATA Conﬁguration

The SATA Conﬁguration menu allows you to conﬁgure your storage devices. Select an item

then press <Enter> to display the submenu.

OnChip SATA Speed [Auto]

[Auto]

Allows automatic detection of the SATA speed.

[SATA 3.0Gb/s]

Set this item to [SATA 3.0Gb/s] if you installed 3.0Gb/s SATA HDDs on this

motherboard.

[SATA 6.0Gb/s]

Set this item to [SATA 6.0Gb/s] if you installed 6.0Gb/s SATA HDDs on this

motherboard.

OnChip SATA Channel [Enabled]

[Enabled]

Enables the onboard channel SATA port.

[Disabled]

Disables the onboard channel SATA port.

The following two items appear only when you set the

OnChip SATA Channel

item to

[Enabled].

SATA Port1 - Port4 [IDE]

Allows you to set the SATA conﬁguration.

[IDE]

Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[RAID]

Set to [RAID] when you want to create a RAID conﬁguration from the SATA

hard disk drives.

[AHCI]

Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard

storage driver to enable advanced Serial ATA features that increases

storage performance on random workloads by allowing the drive to

internally optimize the order of commands.

•

When this item is set to [AHCI], the information of the SATA connectors 1–6 can be

seen under the OS environment or during POST.

•

For Windows

XP OS, you have to install the AHCI driver, so that you could use the

SATA connectors 1–6 in AHCI mode under the OS environment.

SATA Port5 - Port6 [IDE]

Setting this item to [IDE] instead of [RAID] or [AHCI] allows the system to recognize the

optical dirves connected to the SATA connectors 5 or 6 when installing OS.

If you use a SATA optical drive to run the OS installation disk, we strongly recommend that

you install the optical dirve to the SATA connectors 5/6 and set them to [IDE] mode.

M5A88-V EVO BIOS Setup

Version 0207

Main

SATA Conﬁguration

OnChip SATA Speed

[Auto]

OnChip SATA Channel

[Enabled]

SATA Port1 - Port4

[IDE]

SATA Port5 - Port6

[IDE]

For the better HDD

compatibility please

set SB850 SATA speed

to [SATA 3.0Gb/s] to

support SATA 3.0Gb/s

HDDs with Max. speed