Asus N3150I-C User Guide - Page 48

Onboard Devices Configuration, USB Single Port Control, HD Audio Controller [Enabled]

Get Asus N3150I-C PDF manuals and user guides View all Asus N3150I-C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.3 Motherboard layout for the location of the USB ports. 2.5.7 Onboard Devices Configuration HD Audio Controller [Enabled] This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] The following item appears only when you set the HD Audio Controller item to [Enabled]. Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97. Realtek LAN Controller [On] [On] Enables the Realtek LAN controller. [Off] Disables the controller. Realtek PXE OPROM [Off] This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options: [On] [Off] Power Loading [Auto] Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. If this occurs, please set this item to Enabled. Configuration options: [Auto] [Enabled] [Disabled] Serial Port 1/2 Configuration The sub-items in this menu allow you to set the serial port configuration. Serial Port [On] Allows you to enable or disable the serial port (COM) 1/2. Configuration options: [On] [Off] Change Settings [IO=3F8h; IRQ=4] This item appears only when you set the Serial Port to [Enabled] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Parallel Port Configuration The sub-items in this menu allow you to set the parallel port configuration. 2-18 Chapter 2: Getting started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section
1.2.3 Motherboard layout
for the location of the USB ports.
2.5.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
The following item appears only when you set the HD Audio Controller
item to
[Enabled]
.
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high‑definition audio depending on the audio standard that the front panel audio
module supports.
[HD Audio]
Sets the front panel audio connector (AAFP) mode to high definition
audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97.
Realtek LAN Controller [On]
[On]
Enables the Realtek LAN controller.
[Off]
Disables the controller.
Realtek PXE OPROM [Off]
This item appears only when you set the
Realtek LAN Controller
item to [Enabled] and
allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options:
[On] [Off]
Power Loading [Auto]
Enables or disables dummy load. When the power supply is at low load, a self‑protection
will activate causing it to shutdown or fail. If this occurs, please set this item to Enabled.
Configuration options: [Auto] [Enabled] [Disabled]
Serial Port 1/2 Configuration
The sub‑items in this menu allow you to set the serial port configuration.
Serial Port [On]
Allows you to enable or disable the serial port (COM) 1/2. Configuration options: [On] [Off]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the
Serial Port
to [Enabled] and allows you
to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration
The sub‑items in this menu allow you to set the parallel port configuration.
2‑18
Chapter 2: Getting started