Asus NCCH-DR NCCH-DR User Manual English Version - Page 50
Pin Rear_fan1/2, Frnt_fan1/2
View all Asus NCCH-DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6 . CPU and system fan connectors (4-pin CPU_FAN1/2, 3-pin REAR_FAN1/2, FRNT_FAN1/2) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! CPU_FAN1 GND FANPWR2 Rotation FANOUT4 CPU_FAN2 FANOUT6 Rotation FANPWR3 GND REAR_FAN1 REAR_FAN2 GND +12V Rotation Rotation +12V GND NCCH-DR NCCH-DR Fan connectors FRNT_FAN1 GND +12V Rotation FRNT_FAN2 GND +12V Rotation 7 . USB port connector (10-1 pin USB34) This connector is for additional USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. Never connect a 1 3 9 4 c a b l e to the USB connectors. Doing so will damage the motherboard! USB+5V USB_P4USB_P4+ GND NC 2-30 USB34 NCCH-DR NCCH-DR USB 2.0 connector The USB port module is purchased separately. Chapter 2: Hardware information USB+5V USB_P3USB_P3+ GND