Asus NCCH-DR NCCH-DR User Manual English Version - Page 91
Reset Configuration Data [Disabled], Resources Controlled By [Auto], PCI/VGA Pallete Snoop [Disabled
View all Asus NCCH-DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
4.4.6 PCIPnP This menu shows the PCIPnP configuration settings. Select an item then press to display a pop-up menu with the configuration options. PCIPnP Reset Configuration Data [Disabled] Resources Controlled By IRQ Resources [Auto] PCI/VGA Pallete Snoop INT Pin 1 Assignment INT Pin 2 Assignment INT Pin 3 Assignment INT Pin 4 Assignment INT Pin 5 Assignment INT Pin 6 Assignment INT Pin 7 Assignment INT Pin 8 Assignment [Disabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Select Menu Item Specific Help Default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup, if you installed a new add-on card and the system reconfiguration has caused a serious conflict that the OS cannot boot. Reset Configuration Data [Disabled] Allows you to enable or disabled resetting of the Extended System Configuration Data (ESCD) when you exit the Setup. The ESCD includes information on non-PnP devices. Set this item to [Enabled] if you installed an expansion card that conflicts with other devices and cause system boot failure. Configuration options: [Disabled] [Enabled] Resources Controlled By [Auto] When set to [Auto(ESCD)], allows BIOS to automatically configure of all boot and Plug and Play devices. When set to [Manual], you can assign the available IRQ Resources to the PCI devices. Configuration options: [Auto] [Manual] When the item R e s o u r c e s C o n t r o l l e d B y is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section "IRQ Resources" for information on how to enable this item. PCI/VGA Pallete Snoop [Disabled] Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using a standard VGA card, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] INT Pin 1~8 Assignment [Auto] Allows you to select the appropriate interrupt to the specific devices to avoid conflict. Configuration options: [Auto] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15] ASUS NCCH-DR 4-29