Asus NCCH-DR NCCH-DR User Manual English Version - Page 92

IRQ Resources Set the item R e s o u r c e s C o n t r o l l e d B y is set to [Manual] to enable the item I R Q R e s o u r c e s and assign the interrupts depending on the type of installed PCI device. PCIPnP Reset Configuration Data Resources Controlled By IRQ Resources PCI/VGA Pallete Snoop INT Pin 1 Assignment INT Pin 2 Assignment INT Pin 3 Assignment INT Pin 4 Assignment [Disabled] [Manual] [Disabled] [Auto] [Auto] [Auto] [Auto] Select Menu Item Specific Help BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose auto, you cannot select IRQ DMA and memory base address fields, since BIOS IRQ Resources IRQ-3 assigned to IRQ-4 assigned to IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-12 assigned to IRQ-14 assigned to IRQ-15 assigned to [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] Select Menu Item Specific Help Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed for PCI or ISA bus architecture. IRQ-xx assigned to [PCI device] The IRQ Resources sub-menu is activated when the Resources Controlled by parameter is set to [Manual]. Select [PCI Device] to assign an IRQ address to a Plug and Play device. Setting to [Reserved] reserves the IRQ address. Configuration options: [PCI Device] [Reserved] 4-30 Chapter 4: BIOS setup