Asus P4P800 Deluxe Motherboard DIY Troubleshooting Guide - Page 55
RAID Migration Instructions - drivers download
View all Asus P4P800 Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
RAID Migration Instructions R 18 RAID Migration Instructions The Intel Application Accelerator RAID Edition offers the flexibility to upgrade from a single Serial ATA (SATA) hard drive to a two drive RAID 0 or RAID 1 configuration when an additional SATA hard drive is added to the system. This process will create a new RAID volume from an existing disk. However, several important steps must be followed at the time the system is first configured in order to take advantage of RAID when upgrading to a second SATA hard drive: 1. BIOS must be configured for RAID before installing Windows* XP on the single SATA hard drive. Refer to Section 8 and 10 to properly configure the BIOS. 2. Install the Intel Application Accelerator RAID Edition during Windows Setup. Refer to Section 11 for instructions on installing the driver during Windows Setup. 3. Install the Intel Application Accelerator RAID Edition after the operating system is installed. See Section 13.3 for where the Intel Application Accelerator RAID Edition can be downloaded. To create a volume from an existing disk, complete the following steps: Warning: A 'Create from Existing Disk' operation will delete all existing data from the added disk and the data cannot be recovered. It's critical to backup all important data on the added disk before proceeding. However, during the migration process, the data on the source disk is preserved. User's Manual 55