Asus P4S333 C User Manual - Page 61

ASUS P4S333 motherboard user guide, POST Message, Action

Get Asus P4S333 C PDF manuals and user guides View all Asus P4S333 C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

POST Message Action No keyboard detected • Check your keyboard if properly connected to the purple PS/2 connector on the rear panel. • See section "1.3.1 Identifying the motherboard components" for the location of the connector. No floppy disk detected • Make sure you have connected a floppy disk to the floppy disk connector on the motherboard. • See section "2.8 Connectors." No IDE hard disk detected • Make sure you have connected an IDE hard disk drive to the one of the IDE connectors on the motherboard. • See section "2.8 Connectors." CPU temperature too high • Check CPU fan if working properly. CPU fan failed • Check the CPU fan and make sure it turns on after you applied power to the system. CPU voltage out of range • Check your power supply and make sure it is not defective. • Call ASUS technical support for assistance. See the "ASUS contact information" on page x. System completed Power-On Self Test • No action required Computer now booting from operating • No action required system You may disable the ASUS POST Reporter™ in the BIOS setup. See section "4.4.2 I/O Device Configuration". ASUS P4S333 motherboard user guide 3-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
ASUS P4S333 motherboard user guide
3-3
No keyboard detected
•
Check your keyboard if properly
connected to the purple PS/2
connector on the rear panel.
•
See section “1.3.1 Identifying the
motherboard components” for the
location of the connector.
No floppy disk detected
•
Make sure you have connected a
floppy disk to the floppy disk
connector on the motherboard.
•
See section “2.8 Connectors.”
No IDE hard disk detected
•
Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
•
See section “2.8 Connectors.”
CPU temperature too high
•
Check CPU fan if working properly.
CPU fan failed
•
Check the CPU fan and make sure
it turns on after you applied power
to the system.
CPU voltage out of range
•
Check your power supply
and
make sure it is not defective.
•
Call ASUS technical support for
assistance. See the “ASUS contact
information” on page x.
System completed Power-On Self Test
•
No action required
Computer now booting from operating
•
No action required
system
POST Message
Action
You may disable the ASUS POST Reporter™ in the BIOS setup. See
section “4.4.2
I/O Device Configuration”.