Asus P55SP4 P/I-P55SP4 User's manual - Page 22

Upgrade Guide The basic procedure is as follows: 1. Open the system case to gain access to the expansion slots. 2. Remove the slot-cover corresponding to the slot you want plan to use. Put the slot-cover retaining screw aside and store the slot cover in case you need it later. 3. Remove the card from its protective packaging if you haven't already. 4. Align the card's slot connectors to the slot. Keep the card at a 90° angle to the mainboard. Insert the card into the slot by pressing it firmly downward. If there is a lot of resistance, make sure the slot connectors are lined up correctly. PCI cards require very little pressure to insert. 5. Attach the card's mounting bracket to the case using the slot cover screw you put aside in Step 2. 6. Close the case, turn on the computer and check to see if the card is working properly as well as do any software set up required. Remove the slot 0 retaining screw & slot cover I Use the screw to C -2 secure the card to the case I The component side of the card shou d face right (or up) for an ISA card and left (or down) for a PCI card 2 - 3