Asus P5LD2 P5LD2 User's Manual for English Edition - Page 46
Internal connectors
View all Asus P5LD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2.7.2 Internal connectors 1 . Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. P5LD2 FLOPPY ® PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. P5LD2 Floppy disk drive connector 2. ITE IDE connectors (40-1 pin PRI_EIDE [red], SEC_EIDE [red]) These connectors are for Ultra ATA 133/100/66 signal cables. The ITE IDE connectors support up to four IDE hard disk drives for easier data storage and data transfer. P5LD2 ® P5LD2 RAID connectors SEC_EIDE PIN 1 PRI_EIDE PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. • Make sure that you install the I T E 8 2 1 1 I D E D r i v e r from the support CD before using the IDE device attached to any of these connectors. See Chapter 5 for details. • These connectors do not support ATAPI devices. 2-24 Chapter 2: Hardware information