Asus P5MT-S User Guide - Page 39
CPU fan pin selection 3-pin FM_CPU1, FM_CPU2
View all Asus P5MT-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2) These jumpers allow you to connect either a 3-pin or a 4-pin fan cable plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins 2-3 if you are using a 4-pin plug. ® P5MT-S P5MT-S FM CPU Setting FM_CPU1 12 23 3-pin fan 4-pin fan (Default) FM_CPU2 1 2 3-pin fan 2 3 4-pin fan (Default) 3. USB device wake-up (3-pin USBPW12, USBPW34) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S4 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). USBPW12 12 23 ® P5MT-S +5V (Default) +5VSB USBPW34 32 21 +5VSB P5MT-S USB Device Wake-Up +5V (Default) • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • If you are using Windows 2000, you need to install Service Pack 4 to wake up the system from S4 sleep mode. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS P5MT-S 2-19