Asus P5MT-S User Guide - Page 41
to use the LSI Logic Embedded SATA RAID Setup Utility default
View all Asus P5MT-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2) These jumpers allow you to enable or disable the onboard Broadcom® BCM5721 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN controller. ® P5MT-S LAN_EN1 2 1 Enable (Default) P5MT-S LAN1 Controller Setting 3 2 Disable ® P5MT-S LAN_EN2 2 1 Enable (Default) 3 2 Disable P5MT-S LAN2 Controller Setting 7. RAID controller selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® P5MT-S RAID_SEL1 1 2 LSI RAID ROM (Default) 2 3 INTEL RAID ROM P5MT-S RAID Controller Selection ASUS P5MT-S 2-21